CASE①-1 VIEW OF PROCESS
CASE①-2 DETAIL OF PROCESS
| Ti-6Al-4V | |
|---|---|
| MATERIAL | Ti-6Al-4V |
| CUTTING TOOL | EMUGE FRANKEN for Trochoidal Machining Φ12 |
| COOLANT | DIPS10-1SA DRY ICE COOLANT SYSTEM |
| FEED RATE | 1989mm/min. |
| CUTTING SPEED | 120m/min. |
| ae | 0.3mm |
| ap | 30mm |
| DIPS Parameters | |
|---|---|
| AIR PRESSURE | 350kPa |
| LCO2 SUPLLY | 100g/min. |
| PERTICLE SIZE | 30μm |
| FROM NOZZLE | 60mm |
| AIR TEMP. | 60℃ |